GROUT PERLA GREY PICCADILLY
Grout for tiles PICCADILLY. Ready industrial mortar for the joint-filling (grouting).
Free Delivery
within Attica for orders over 100€Over than 8200
products in stockGrout for tiles Perla Grey Piccadilly.
Ready industrial mortar for the joint-filling (grouting) of all types of ceramic tiles, absorbent or not, as well as marble slabs & tiles, for joints up to 6 mm. It is based on high-strength Portland white cement (I - 52.5) and selected marble and quartz aggregates and additives to improve adhesion and workability.
It is used for the joint-filling of all types of tiles on vertical and horizontal surfaces, indoors and outdoors. Add the MP 20 acrylic dispersion to further improve adhesion, flexibility and impermeability in areas occasionally affected by humidity and characterized by contractions and expansions (underfloor heating and exterior floors).
Colour: 24 different colours according to colour index |
Compressive strength in 28 days: > 30,0 MPa (EN 12808-3). |
Flexural strength in 28 days: > 5,0 MPa (EN 12808-3). |
Compressive strength after 25 cycles of freezing - thawing: > 30,0 MPa (EN 12808-3). |
Flexural strength after 25 cycles of freezing - thawing: > 5 MPa (EN 12808-3). |
Shrinkage: ≤ 3 mm/m (EN 12808-4). |
Water absorption after 30 min: ≤ 2 g (EN 12808-5). |
Water absorption after 240 min: ≤ 5 g (EN 12808-5). |
Abrasion strength: ≤ 1000 mm³ (EN 12808-2). |
Open time for application:60 minutes at 20oC |
Time for minor corrections: 5-10min |
Application temperature +5oC to +35oC
|