ULTRACARE KERAPOXY CLEANER SPRAY BOOTLE 0,75LT MAPEI

Ultracare Kerapoxy Cleaner spray 750ml, can be used both for fresh cleaning operations and after completing laying work to remove traces and stains of epoxy residues, by Mapei.

It will remove traces and marks of all epoxy grouts, including MAPEI Kerapoxy, Kerapoxy CQ, Kerapoxy Easy Design, from ceramic and glass mosaic coating layers

Code: 1149826RU

Attention!
- Do not use on polished marble or stone.
- Do not use on wood.
- Do not use on methacrylate baths.
- Before using UltraCare Kerapoxy Cleaner on materials with an unknown surface resistance, test the product beforehand to make sure it does not damage the surface.
-Before using the product, protect all surfaces which could be damaged in direct contact with the product.

UltraCare Kerapoxy Cleaner is diluted and ready to use. Apply it directly onto the surface to be cleaned or onto the traces of grout residue and leave for a few minutes. Then work over the surface with a Scotch-Brite pad. Remove the solution and then rinse thoroughly with clean water. The product is particularly efficient on fresh grout. If cleaning is carried out a few hours after applying the grout, it may be necessary to leave it standing for longer (at least 15-20 minutes) or you may need to repeat the cycle. For residues that have cured on the surface over time or if residues persist then use UltraCare Epoxy Off Gel. Please refer to the relative techincal data sheet for the application method. For applications on flooring it is possible to carry out cleaning with single disc cleaning machine.